Description
Solvitol Electrical Cleaner Spray (DCL) is a solvent cleaner specifically designed for use in the electronics industry. It is compatible with most plastics, leaves no residue, and is easy to use.

Applications
Solvitol Electrical Cleaner Spray is formulated specifically for use in the electrical and electronics industries for cleaning and degreasing printed circuit boards, electrical contacts, read/write heads, type paths, and guideposts.

Benefits
 Leaves no residue.
 Economical in use.
 Cleans and degreases.
 Controlled drying time.
 Easy to apply spray application.
 Available in a 400ml aerosol.

Technical Data
Appearance : Clear colourless liquid.
Contents : No silicones or chlorinated solvents.
Flash Point : Less than 0C

Pack Sizes:
Aerosol
12 x 400ml box

Directions for Use
Shake the can before use, hold upright and spray from a distance of 15- 30cm (6 – 12 ins).
Caution: Do not use on live electrical equipment. Switch off and isolate all equipment before use.
 
Health and Safety
Health & Safety Information is available from the Sales Department of:
James Briggs Ltd. Salmon Fields, Royton, Oldham, OL2 6HZ. Fax 0161 627 0971
 
Where tolerances are not stated, figures are typical of normal production. Whilst every care is taken to ensure the accuracy of the material contained in the bulletin, the technical data is provided for information only. The buyer shall use its own skill and judgement to satisfy it that the products are suitable for the buyer’s purposes. The entire liability of Solvitol Limited in relation to the products shall be set out in Solvitol Limited’ conditions of sale which are hereby incorporated into this bulletin. Solvitol Limited can assume no liability for the information given. 6/04