Description
Solvitol Leak Detector Spray has been developed to locate gas leaks on equipment during use or after assembly prior to commissioning.

Applications
Solvitol Leak Detector produces a micro stable foam which will indicate the position of the smallest gas leak. It can be used on Oxy- Acetylene and LPG (Butane/ Propane) and will not form a combustible mixture with other gases. It is ideal for use by welders, plumbers and gas fitters.

Benefits
 Not classified as flammable.
 Non corrosive.
 Ozone friendly.
 Bio-degradable.
 Easy to apply spray application.
 Available in a 300ml aerosol.

Technical Data
Appearance : Opaque milky viscous liquid.
Contents : Blend of surface active agents and a corrosion prevention package in demineralised water, propelled by nitrogen.
Flashpoint : >61 degrees C
Pack Sizes:
Aerosol
12 x 300ml box

Directions for Use
Aerosol - Spray on to suspected area of leak. A stream of bubbles will locate the exact position of the gas escape.
Caution - Do not use with phosphorous or phosphorous compound gases.
 
Health and Safety
Health & Safety Information is available from the Sales Department of:
James Briggs Ltd. Salmon Fields, Royton, Oldham, OL2 6HZ. Fax 0161 627 0971
 
Where tolerances are not stated, figures are typical of normal production. Whilst every care is taken to ensure the accuracy of the material contained in the bulletin, the technical data is provided for information only. The buyer shall use its own skill and judgement to satisfy it that the products are suitable for the buyer’s purposes. The entire liability of Solvitol Limited in relation to the products shall be set out in Solvitol Limited conditions of sale, which are hereby incorporated into this bulletin. Solvitol Limited can assume no liability for the information given. 6/04