Description
Solvitol Moisture guard Spray (GMG3) is a thin film product specially designed to provide the ultimate indoor protection against corrosion and pitting. The unique formula also displaces moisture and protects against fingerprint corrosion. It contains a fugitive dye for identification during application.

Applications
Solvitol Moisture guard can be used on all types of metal components where de-watering and protection against oxidation and rusting is required. It is widely used in the plastic injection moulding industry to protect the die surface during shutdown and storage. When used to protect plastic injection mould tools, experience has shown that in most cases cleaning off is not required since the protective film will be removed with the first few mouldings.

Benefits

 Up to 12 months indoor protection.
 Displaces moisture.
 Green fugitive dye identifies treated surfaces.
 Ultra thin film (3-5 microns).
 Suitable for all metals.
 Easy to use spray application.
 Available in a 400ml aerosol.

Technical Data

Appearance : Thin green waxy film

Pack Sizes:
Aerosol
12 x 400ml box

Directions for Use

Aerosol: - Shake can before use and spray from a distance of 15-30cms (6-12ins)
Caution: - Ensure adequate ventilation
 
Health and Safety information is available from the Sales Department of:
James Briggs Ltd. Salmon Fields, Royton, Oldham, OL2 6HZ. Fax 0161 627 0971
  
Where tolerances are not stated, figures are typical of normal production. Whilst every care is taken to ensure the accuracy of the material contained in the bulletin, the technical data is provided for information only. The buyer shall use its own skill and judgement to satisfy it that the products are suitable for the buyer’s purposes. The entire liability of Solvitol Limited in relation to the products shall be set out in Solvitol Limited conditions of sale, which are hereby incorporated into this bulletin. Solvitol Limited can assume no liability for the information given. 6/04