Description
Solvitol NDT Dye Penetrant System consists of three aerosol packed products used in conjunction with each other for the detection of surface cracks in metal components both ferrous and non-ferrous. The system is approved to ASME specification and complies with DTD929.

Applications
Solvitol NDT Dye Penetrant System has many industrial applications such as welded seams on tanks, inspection of castings for pump & valve bodies, railway carriage wheels, engine turbine blades, forklift truck forks, hooks etc. on cranes and lifting tackle, marine boiler tubes inspection etc.

Benefits
 System mobility – on site inspection
 Easy and quick to use
 High sensitivity
 Non-destructive
 Available in 400ml aerosols

The System

Aerosol 1:  Solvitol Crack Detector Cleaner (CDC)
This consists of a powerful fast drying solvent cleaner designed for the preparation of the surface before the application of aerosol 2, the Dye Penetrant.

Aerosol 2:  Solvitol Crack Detection Penetrant (DYE)
This product is based upon a red dye, which is designed to penetrate into surface cracks. It should be applied to a clean dry surface. After leaving the dye on the surface for a few moments, the surplus should be cleaned off using a lint free rag soaked in the cleaner.

Aerosol 3:  Solvitol Crack Detector Developer (DEV)
This is designed to be applied to the surface immediately after cleaning off the surplus dye from the surface being inspected. This aerosol will deliver a white powder film to the surface, which has the effect of drawing out the dye in the surface cracks. The effect is high definition of the red dye against a white background. The operation is now complete and the work piece can either be left as it is for further inspection or cleaned using Aerosol No.1.

Pack Sizes:
Aerosols
12 x 400ml box (each product)
 
Health and Safety information is available from the Sales Department of:
James Briggs Ltd. Salmon Fields, Royton, Oldham, OL2 6HZ. Fax 0161 627 0971
  
Where tolerances are not stated, figures are typical of normal production. Whilst every care is taken to ensure the accuracy of the material contained in the bulletin, the technical data is provided for information only. The buyer shall use its own skill and judgement to satisfy it that the products are suitable for the buyer’s purposes. The entire liability of Solvitol Limited in relation to the products shall be set out in Solvitol Limited conditions of sale, which are hereby incorporated into this bulletin. Solvitol Limited can assume no liability for the information given. 6/04