Description
Solvitol Plastic Mould Release Sprays consist of three aerosol packed products, all designed to give optimum release during injection, compression, blow and lamination moulding processes.

Applications
Solvitol Plastic Mould Release Sprays each have different compositions that impart different surface characteristics to the finished moulding.

Benefits
 Clean to use
 Improves surface finish of components
 Easy to use spray application
 Available in 400ml aerosols

The Products

Solvitol Silicone Plastic Mould Release Spray (SIL)
A clear fluid with excellent anti-stick properties, designed to improve the surface finish of plastic and rubber-moulded parts. Working temperature of –50oC to +300oC. Economical to use, long lasting, thus reducing the rate of application.

Solvitol Non-Silicone Plastic Mould Release Spray (NSMR)
Light amber fluid that imparts an excellent anti-stick film designed to improve the surface finish of plastic and rubber moulded parts where the parts require gluing or welding after production. In addition, most effective where a high surface finish is required e.g. telephones or decorative parts. Working temperature of 0oC to +100oC.

Solvitol P.T.F.E. Plastic Mould Release Agent (PTFED)
Dry anti-stick film designed to eliminate transfer to component parts that require overprinting, painting, plating, gluing or welding after production. Working temperature up to +250oC.
Caution: - The film produced by this product is porous and therefore not suitable for use with resin laminates.

Pack Sizes: -
Each product pack is a 12 x 400ml box
 
Health and Safety information is available from the Sales Department of:
James Briggs Ltd. Salmon Fields, Royton, Oldham, OL2 6HZ. Fax 0161 627 0971
  
Where tolerances are not stated, figures are typical of normal production. Whilst every care is taken to ensure the accuracy of the material contained in the bulletin, the technical data is provided for information only. The buyer shall use its own skill and judgement to satisfy it that the products are suitable for the buyer’s purposes. The entire liability of Solvitol Limited in relation to the products shall be set out in Solvitol Limited conditions of sale, which are hereby incorporated into this bulletin. Solvitol Limited can assume no liability for the information given. 6/04