Solvitol Solvent Based Spatter
Release Spray
Click here for
PDF version
Description
Solvitol Solvent Based Spatter Release Spray (WSR) has been specifically
designed to prevent the adhesion of weld spatter to work surfaces, nozzles,
jigs, fixtures, etc. It is not classified as flammable, economical in use, and
will not affect the weld formation.
Applications
It can be used on all types of welding operations including MIG, and CO2, as
well as robotics.
Benefits
Not classified as flammable.
Economical in use.
Prevents adhesion.
Long lasting.
Spatter easily removed.
Does not affect weld.
Easy to apply spray application.
Available in a 450grm aerosol
Technical Data
Appearance : Light amber liquid.
Contents : Dichloromethane, No silicones.
Storage : Below 30OC
Pack Sizes:
Aerosol
12 x 450grm box
Directions for Use
Shake the can before use; hold upright and spray from a distance of 15- 30cm (6
-12 inches) apply a thin even coating.
Caution: - Ensure adequate ventilation during application.
Health and Safety
Health & Safety Information is available from the Sales Department of:
James Briggs Ltd. Salmon Fields, Royton, Oldham, OL2 6HZ. Fax 0161 627 0971
Where tolerances are not stated, figures are typical of
normal production. Whilst every care is taken to ensure the accuracy of the
material contained in the bulletin, the technical data is provided for
information only. The buyer shall use its own skill and judgement to satisfy it
that the products are suitable for the buyer’s purposes. The entire liability of
Solvitol Limited in relation to the products shall be set out in Solvitol
Limited conditions of sale, which are hereby incorporated into this bulletin.
Solvitol Limited can assume no liability for the information given. 6/04
